Experience

Bruce Der, P.Eng., M.B.A., President (Phone Extension: 101)

Chemical Engineer with knowledge in heat exchangers, distillation, absorption, scrubbing, evaporation, separation, reaction kinetics, and incineration. 34 years experience with A.H. Lundberg. A specialist at heat and material balances, process design, optimization, development of system options, equipment sizing and retrofitting, cost-benefit analysis, short and long range planning, and technical report writing. Experienced with blow heat recovery, NCG collection & incineration, condensate stripping, scrubbing, condensate segregation, incinerators, chemical preparation, evaporation, heat recovery, turpentine recovery, soap, white liquor oxidation, heat exchangers, heavy liquor heating, etc. Registered as an Industrial Energy Manager with B.C. Hydro Power Smart Industrial Alliance program.

Allan Jensen, P.Eng., PhD., Technical Manager (Phone Extension: 102)

17 years experience with A.H. Lundberg. Experienced with blow heat recovery, NCG collection & incineration, condensate stripping, scrubbing, condensate segregation, incinerators, chemical preparation, evaporation, heat recovery, turpentine recovery, soap, black and white liquor oxidation, heat exchangers, heavy liquor heating, etc. A specialist at process design, technical report writing and system optimization.

Ben Lin, P.Eng., M.Eng., Product Manager (Phone Extension: 103)

7 years experience with A.H. Lundberg plus 17 years experience in the Pulp and Paper Industry. Experienced with blow heat recovery, NCG collection & incineration, condensate stripping, scrubbing, waste heat boilers, incinerators, turpentine recovery, white liquor oxidation etc. A specialist at process design, technical report writing, troubleshooting and system optimization.

Tim Binnema, AScT, Manager of Engineering (Phone Extension: 117)

21 years experience with A.H. Lundberg. Experienced with blow heat recovery, NCG collection & incineration, condensate stripping, scrubbing, condensate segregation, incinerators, chemical preparation, evaporation, heat recovery, turpentine recovery, soap, black and white liquor oxidation, heat exchangers, heavy liquor heating, etc. A specialist at project management and mechanical design.

Tom To, AScT, Manager of Electrical and Instrumentation (Phone Extension: 119)

20 years experience with A.H. Lundberg. Experienced with blow heat recovery, NCG collection & incineration, condensate stripping, scrubbing, condensate segregation, incinerators, chemical preparation, evaporation, heat recovery, turpentine recovery, soap, black and white liquor oxidation, heat exchangers, heavy liquor heating, etc. A specialist at project management and E & I design.

Jules Dumont, Senior Project Manager / Mechanical Design Specialist (Phone Extension: 106)

46 years experience with A.H. Lundberg. Extensive experience with mechanical design (equipment, layout, tie-ins, piping, costing, and installation logistics) on blow heat recovery, NCG collection & incineration, condensate stripping, scrubbing, condensate segregation, incinerators, chemical preparation, evaporation, heat recovery, turpentine recovery, soap, black and white liquor oxidation, heat exchangers, heavy liquor heating, etc.

Wing Chan, Senior Project Manager / Mechanical Design Specialist (Phone Extension: 118)

36 years experience with A.H. Lundberg. Extensive experience with mechanical design (equipment, layout, tie-ins, piping, costing, and installation logistics) on blow heat recovery, NCG collection & incineration, condensate stripping, scrubbing, condensate segregation, incinerators, chemical preparation, evaporation, heat recovery, turpentine recovery, soap, black and white liquor oxidation, heat exchangers, heavy liquor heating, etc.

Amin Manji, P.Eng., M.A.Sc., Senior Process Engineer (Process Extension: 105)

3 years experience with A.H. Lundberg, 18 years experience in the Pulp and Paper, Chemical and Petrochemical Industry. Experience in process engineering including process evaluation, optimization, equipment sizing and process simulation. Experienced with Pulp Fiber line, Chemical Preparation Area and Chlorine dioxide. A specialist at process design (heat and material balances), cost estimation, technical report writing, troubleshooting, bid evaluations and equipment purchasing, and system optimization.